Main Features
通道:4
输入电压类型: mA, V, Thermistor, RTD
输入电压范围: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
看门狗计时
ADAM-4022T双环PID控制器是一个串行控制器。
它是研华ADAM-4000系列带有串行PID控制器的产品。
由于具有±0.15%的精准度,ADAM-4022T在温度和其他制冷制热应用与环境测试的处理过程中是一款理想的控制器。
ADAM-4022T实用软件能够助你选择输入和配置范围,设置工作参数((SP, Sv, Pv …等),满足你的过程控制需求。
ADAM-4022T专为在工业环境中使用而设计。
它能在橱柜内的标准DIN轨道上安装。
并且它能由10~30Vdc供电,以满足现场各种供电电源。
它还能抵挡周边高达60℃温度,并能抵制振动和机械抖动产生的影响。
ADAM-4022T-AE
Display LED Indicators Power
Power Supply Power Re 10~30 VDC
Analog Input Channels 4 differential
Voltage Range 0~10 V
Current Input 0~20 mA, 4~20mA
Direct Sensor Input Thermistor 3k, 10k RTD (Pt100, 1000)
Burn-out Detection Yes
Channel Independent Configuration Yes
Sampling Rates 10 samples/second (total)
Resolution 16-bit
CMR @ 50/60 Hz 92 dB
Analog Output Channels 2
Voltage Range 0~10 V
Current Output 0~20 mA, 4~20mA
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 2
Input Voltage Logic level 0: close to GND Logic level 1: open
Digital Output Channels 2 Open collector to 30V, 30 mA max. load
Power Dissipation 300 mW
研华ADAM-4022T 串行双回路PID控制器